HPE FlexNetwork 5510 24G PoE+ 4SFP+ HI 1-slot Switch

HPE FlexNetwork 5510 24G PoE+ 4SFP+ HI 1-slot Switch

5,457.00 5457.0 USD

5,457.00

Añadir al Carrito

Differentiator: 


Layer 3 switch with 24 10/100/1000 ports
4 10GbE SFP+ and 1 expansion module slots
Supports Intelligent Resilient Framework (IRF) virtual fabric and dual power supplies

Ports


(24) RJ-45 autosensing 10/100/1000 PoE+ ports
Ports 1 - 8 support MACSec
(4) SFP+ 10GbE ports
(1) port expansion module slot
Supports a maximum of 6 SFP+ ports or 2 1/10GBASE-T ports or 2 40GbE ports, with optional module

Memory and processor: 


2 GB SDRAM
Packet buffer size: 4 MB
512 MB flash

Latency:


1000 Mb Latency: < 5 µs
10 Gbps Latency: < 3 µs

Throughput:


up to 214 Mpps

Routing/switching capacity:


288 Gbps

PoE capability:


740 W PoE+

Staking capabilities:


IRF
9 switches

Management features:


IMC - Intelligent Management Center
Command-line interface
Web browser
SNMP manager

Input voltage:


100 - 240 VAC, rated (90 - 264 VAC, max) (depending on power supply chosen)

Power consumption:


650 W (maximum)

Heat dissipation:


2217 BTU/hr (3599.66 kJ/hr)

Minimun dimensions (H x W x D):


4.37 x 44 x 46 cm

Weight 12.5 kg

What's new

  • Resilient and powerful HPE FlexNetwork advanced Layer 3 switch series with multi-service support and up to 9 chassis IRF scalability.
  • Enhanced MPLS/VPLS support and full-featured IPv4/IPv6 dual stack.
  • Scalability with convenient built-in 10GbE and modular 40GbE uplinks.
  • 1440 W of PoE+ power using dual power supplies for high resiliency.
  • Industry standard MACsec support for improved switch to switch security.

Features

Highly Resilient, More Secure, and Scalable Access Layer Switches

The HPE FlexNetwork 5510 HI Switch Series delivers outstanding resiliency, security, and multiservice support capabilities for traditional large enterprise networks. Advanced technologies include OAM, CFD, RRPP, BFD, Multi-level QoS, MPLS, and VPLS.

The HPE Intelligent Resilient Framework (IRF) virtualizes up to nine physical switches into one logical device for simpler, flatter, more agile networks.

Offers scalable stacking with both built-in and modular 10GbE uplinks and 40GbE for high capacity, back-haul connectivity.

Dual, redundant, hot-swappable power supplies keep your network up and running and deliver up to 1440 Watt of PoE+ for powered cameras, phones and wireless access points.

The 5510 HI has IPv6 support and fully featured Layer 3 functionality, including RIP, OSPF, ISIS, BGP, and PIM with no software licensing required.

Powerful Performance

The HPE FlexNetwork 5510 HI Switch Series provides higher levels of security with hardware-based, wire-speed access control lists (ACLs).

Provides simple administration without impacting network performance offering feature-rich TCAM-based ACL implementation.

Non-blocking architecture delivers up to 336 Gb/s of wire-speed switching with a non-blocking switching fabric and up to 250 million pps throughput.

Robust Quality of Service (QoS)

The HPE FlexNetwork 5510 HI Switch Series supports advanced classifier-based QoS which directs traffic using multiple match criteria based on Layer 2, 3, and 4 information and applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch.

Creates traffic classes based on ACLs, IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence. Supports filter, redirect, mirror, or remark.

Get extensive traffic prioritization with congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), SP+WDRR, and SP+WFQ.

Comprehensive Security Control and a Single View of the Network

The HPE FlexNetwork 5510 HI Switch Series supports flexible authentication methods including 802.1X, MAC, and Web authentication for greater security and policy-driven application authentication.

Offers identity-driven security and access control with automatic VLAN assignment and per-user ACLs allow access to specific network services without risking network security.

Security features include: IP source guard, DHCPv6 snooping, STP BPDU port protection, RADIUS/HWTACACS, and SSL. Supports MACsec for greater end-point or switch-to-switch security.

Can be seamlessly managed with HPE Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.

RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.

Specifications for HPE FlexNetwork 5510 24G PoE+ 4SFP+ HI 1-slot Switch

Nuevo