HPE Aruba AP-270-MNT-V1 Wall Mount

HPE Aruba AP-270-MNT-V1 Wall Mount

128.00 128.0 USD

128.00

Añadir al Carrito

Aruba 270 Series Outdoor AP Long Mount Kit. Pole/Wall Mount for AP-270. Positions AP 75 mm from vertical mounting asset.


Specs

 Package Content

Mounting Bracket x 1

M6x20 Screws x 2

60cm Cable Tie x 1

6 inches Hose Clamps x 2

Installation Guide (this document) Mounting the AP to a Wall

1. Begin by marking the mounting points on the wall in the location you have selected. a. Put the mounting bracket on the installation position against the wall. b. Using the mounting bracket as the template, mark four mounting points on the wall.

2. Use a drill to create four holes on the four markings you created in the previous step.

3. Insert an anchor bolt into each drilled hole. Anchor bolts are not included in the mount kit.

4. Place the mounting bracket over the anchor bolts and press the bracket against the wall.

5. Place the washers and nut onto the bolt’s threaded end and tighten the nut until the mounting bracket is firmly attached to the wall as shown in Figure 1.

Figure 1

  Attaching the Mounting Bracket to a Wall

Odoo text and image block

6. Slide the holder of the AP into the opening of the bracket and use the two M6x20 screws included in the package to fix the holder as shown in Figure 2.  

Odoo image and text block
Odoo image and text block

Figure 2

Attaching the AP to the Mounting Bracket

 7. Use the cable tie to fasten the cables on the bracket.


Mounting the AP to a Corner

APs can be installed on a corner of the wall by using AP-270-MNT-V2 and the Samsung Corner Mount

Adaptor.

Note: The Samsung Corner Mount Adaptor must be purchased separately.

1. Begin by attaching the Samsung Corner Mount Adaptor to the wall. Refer to Samsung’s Corner Mount

Adaptor Installation Manual for complete details.

2. Use the bolts and washers to mount the AP-270-MNT-V2 mounting bracket onto the Corner Mount

Adaptor as shown in Figure 3.

Figure 3

 Mounting the Mounting Bracket to the Corner Mount Adaptor

Odoo text and image block

3. Slide the holder of the AP into the opening of the bracket and use the two M6x20 screws included in the

package to fix the holder as shown in Figure 4.

Odoo image and text block

Figure 4

Attaching the AP to the Mounting Bracket

Odoo image and text block

4. Use the cable tie to fasten the cables on the bracket.


Mounting the AP to a Vertical Pole

The mounting bracket provides different slots for pole mounting according to the diameter and shape of the

pole as shown in Figure 5.

Figure 5

 Attaching the Mounting Bracket to a Vertical Pole

Odoo text and image block
Odoo text and image block

 2. Slide the holder of the AP into the opening of the bracket and use the two M6x20 screws included in the

package to fix the holder as shown in Figure 6.

Odoo image and text block
Odoo image and text block

Figure 6

 Attaching the AP to the Mounting Bracke

 3. Use the cable tie to fasten the cables on the bracket.

.

Specifications for HPE Aruba AP-270-MNT-V1 Wall Mount

Nuevo
Usado
Arriendo